Vessel work and maintenance during cargo operation and at sea

It is not allowed to perform maintenance work of any kind during the cargo operation or at sea that have a potential of affecting the cargo and cargo hold without the permission of OPERATORS.

These restrictions include but are not limited to:

1. Greasing of gear/equipment involved in the handling of cargo such as external and internal ramps.
2. Works to involving painting (In cargo hold and outside in the terminal).
3. Washing with seawater.
4. High-pressure air hosing.
5. Rust chipping.
6. Hot work and welding.
7. Engine operations that risk spreading soot from the funnel or stack that can contaminate the berth or cargo.
8. Heaving lines should only be thrown with extreme caution toward the berth. Special attention should be exercised to prevent hit damage to vehicles during berthing operation.